TRUST US; WE WILL UPLIFT YOUR BUSINES 

YESHUA TCR INFOTECH -

Best IT, BPO and PCB-CAM company

YESHUA TCR INFOTECH -

Best IT, BPO and PCB-CAM company

YESHUA TCR INFOTECH -

Best IT, BPO and PCB-CAM company

PCB-CAM

CAM Capabilities

  • Multiseats of CAM 350, U-CAM and Genesis software

  • Micro-modifications performed with customer approval

  • Pre-manufacturing design checks on every part

  • Test fixture generation from Gerber net list

  • Create DFF report as per customer requirement

  • Unlimited editing capabilities and full penalization for single sided, double sided and multi-layer boards for process

Data formats

  • Gerber (Standards and Extended)

  • Barco-DFF

  • DFF

  • Auto CAD

  • ASCII or EXCELLON


Board Specification

SINGLE-SIDE

  • Laminate : FR-4

  • PCB Thickness :1.6 mm/2.4mm/3.2mm

  • Start Copper Thickness : 17.5 Microns/35 Microns/70 microns

  • Min. Track Width/ Spacing: 0.17 / 0.15mm (7 Mils/ 6 Mils)

  • Min. Hole : 0.40mm (16 Mils) FINISH

  • Min. SMD Pitch : 0.5mm (20 Mils)

  • Solder mask : Green

  • Surface Finish :Lead Free HAL / Immersion Silver/ Electro less Nickel Immersion Gold

  • Legend : White

  • Special Requirements: Slots, Cut outs, Carbon contacts and peel off can be provided on request

DOUBLE-SIDE

  • Laminate : FR-4

  • PCB Thickness :1.6mm/2.4mm/3.2mm

  • Start Copper Thickness : 17.5 Microns/35 Microns/70 microns

  • Min. Track Width/ Spacing: 0.17 / 0.15mm (7 Mils/ 6 Mils)

  • Min. Hole: 0.30mmn (12 Mils) (FINISH)

  • SMD Pitch : 0.50mm (20 Mils)

  • Solder mask : Green

  • Surface Finish :Lead Free HAL / Immersion Silver/ Electro less Nickel Immersion Gold

  • Legend : White

  • Special Requirements: Slots, Cut outs, Carbon contacts and peel off can be provided on request.

  • Routing : Simple routing with 2.4 mm (0.094") router

  • Holes in the ground area shall be PTH only.

Multilayer (4-12 layers)

  • Laminate : FR-4

  • PCB Thickness :1.6 mm/2.4mm/3.2mm

  • Start Copper Thickness : 17.5 microns/35 microns/70 microns

  • Min. Track Width/ Spacing: 0.17 / 0.15mm (7 Mils/ 6 Mils)

  • Min. Hole : 0.30mm (12 Mils) (FINISH)

  • SMD Pitch : 0.50mm (20 Mils)

  • Inner Clearance : 0.40mm (16 Mils)

  • Solder mask : Green

  • Surface Finish :Lead Free HAL / Immersion Silver/ Electro less Nickel Immersion Gold

  • Legend : White

  • Special Requirements: Slots, Cut outs, Carbon contacts and peel off can be provided on request.

  • Routing : Simple routing with 2.4 mm (0.094") router

  • Holes in the ground area shall be PTH only.

Standard Types of CAM-WORK

  • Single side

  • Double side

  • Multilayer up to 12 layers

  • Fine pitch, BGA, Gold finger

  • Impedance control Boards

  • FR4, CEM, Metal core PCB's

  • Rogers Material

  • Via on pad

About Us

Team of Experienced and Dedicated CAM Engineers. We are working for Gerber file generation and PCB tooling using electronic CAM software’s for single and multilayer’s boards.

DFF report creation as per customer requirement for fabrication. PCBs are made from Gerber 274-X data and NC drill files, Each Gerber file corresponds to one layer in the physical board – the component overlay, top signal layer, bottom signal layer, the solder masking layers inner layers and so on. Because there are so many different versions of PCB files in use today, In order to avoid version conflicts we require our clients to provide us with a full set of Gerber and NC drill files.

Quality and timing is our priority. Follow all the rules and regulations of the company.

Single Side

Double Side